img
img

Course Details!

List Of Diploma Courses

  • CCNA 200 - 301
  • MCSA
  • LINUX Administration I
  • LINUX Administration II

Description

The infrastructure is the fixed assets of the so-called World Wide Web and any communication process via the Internet, which connects the whole world to each other.
The infrastructure is a group of devices, routers, switches and servers linked to each other to provide communication services between users and each other, between companies as well.
Therefore, beginning to enter the field of information technology requires you to have a good knowledge of how to create, manage and maintain the infrastructure with its three derivatives: networks, servers, data centers.
This diploma is intended for beginners in the field of information technology who do not have any prior knowledge of the field and aims to qualify them adequately to enter the fields of information technology with three different job titles to help them find more than one job opportunity in fields of IT like Network Support and administrations, system administration and Linux administration

Certificates

  • Certificate Of Attendance From IT-Gate Academy
  • Certificate From Ain Shams University (Optional)

Unit 1: Network Fundamentals

  • Introduction to the OSI Model

  • Introduction to IPv4 (Internet Protocol)

  • IPv4 Packet Header

  • Address Resolution Protocol (ARP)

  • Introduction to TCP and UDP

  • TCP Header

  • TCP Window Size Scaling

  • Introduction to ICMP

  • Introduction to DNS

  • Introduction to Cisco Command Line Interface (CLI)

  • User mode and Privileged mode

  • Introduction to Subnetting

  • Basics of Binary Numbers

  • Subnetting in Binary

  • Subnetting in Decimal (Fast Method)

  • Classless Inter-Domain Routing (CIDR)

  • Variable Length Subnet Mask (VLSM)

  • Route Summarization

  • Hexadecimal to Binary and Decimal Conversion

  • Create a Subnetting Cheat Sheet

  • IPv6

  • Introduction to IPv6

  • Shortening IPv6 Addresses

  • How to find IPv6 Prefix

  • IPv6 Address Types

  • IPv6 Address Assignment Example

  • IPv6 EUI-64

  • IPv6 Summarization

  • IPv6 Solicited Node Multicast Address

  • IPv6 Neighbor Discovery Protocol (NDP)

  • IPv6 Stateless Auto configuration

Unit 2: Network Access

  • 2.2 VLANs and Trunks

  • Introduction to VLANs

  • How to configure VLANs

  • VLAN Trunking Protocol (VTP)

  • Introduction to 802.1Q

  • How to configure a Trunk

  • Dynamic Trunking Protocol (DTP)

  • 802.1Q Native VLAN

  • Introduction to Voice VLAN

  • Etherchannels

  • L3 Etherchannel

  • 2.3 Spanning-Tree

  • Introduction to Spanning-Tree

  • Per VLAN Spanning-Tree

  • Spanning-Tree Port States

  • Spanning-Tree Cost Calculation

  • Spanning-Tree Portfast

  • Rapid PVST

  • Rapid PVST Configuration

  • 2.4 Wireless

  • Introduction to Wireless Networks

  • Introduction to Wireless LANs

  • Wireless LAN 802.11 Service Sets

  • Introduction to Wireless Security

  • Wireless Authentication Methods

  • Wireless Encryption and Integrity

  • Wi-Fi Protected Access (WPA)

  • Cisco Wireless Network Architectures

  • Cisco WLC Deployment Models

  • Cisco Wireless AP Modes

  • Cisco Wireless LAN Controller (WLC) Basic Configuration

  • Cisco WLC WPA2 PSK Authentication

Unit 3: IP Connectivity

  • 3.1 Introduction

  • Introduction to Routers and Routing

  • Cisco IOS Router Basic Configuration

  • Introduction to Wide Area Networks (WAN)

  • 3.2 IPv4 Subnetting

  • 3.4 Routing

  • Default Gateway

  • Static Routing

  • IPv6 Static Route

  • IP Routing Explained

  • Router on a Stick

  • InterVLAN Routing

  • Administrative Distance Floating Static Route

  • Introduction to Route Summarization

  • 3.5 OSPF (OPEN SHORTEST PATH FIRST)

  • Introduction to OSPF

  • OSPF Configuration

  • OSPF Packets and Neighbor Discovery

  • OSPF Reference Bandwidth

  • OSPF Router ID

  • OSPF DR

  • BDR Election

  • OSPF Passive Interface

  • OSPF Hello and Dead Interval

  • 3.6 Gateway Redundancy

  • Introduction to Gateway Redundancy HSRP

Unit 4: IP Services

  • 4.1 DHCP (Dynamic Host Configuration Protocol)

  • Introduction to DHCP

  • DHCP Server Configuration

  • DHCP Relay Agent

  • DHCP Client

  • DHCP Server IPv6 Configuration

  • 4.2 SNMP (Simple Network Management Protocol)

  • Introduction to SNMP

  • SNMPv2

  • SNMPv3

  • 4.3 NAT (Network Address Translation)

  • Introduction to NAT and PAT

  • NAT Static

  • NAT Dynamic

  • Port Address Translation (PAT)

  • 4.4 (QoS) Quality of Service

  • Introduction to Quality of Service (QoS)

  • IP Precedence and DSCP Values

  • Classification

  • Marking

  • Shaping

  • Policing

Unit 5: Security Fundamentals

  • 5.1 Access-Lists

  • Introduction to Access-Lists

  • Wildcard Bits

  • Standard Access-List

  • Extended Access-List

  • Time-based Access-List

  • 5.2 Misc

  • Port-Security

  • AAA and 802.1X

  • AAA User Authentication

  • AAA Admin Authentication

  • DHCP Snooping

  • Introduction to Firewalls

  • Introduction to VPNs

Unit 6: Network Management

  • Introduction to CDP

  • Introduction to LLDP

  • Telnet Server and Client

  • SSH Server and Client

  • Introduction to NTP

  • Introduction to Syslog

  • Configuration Register

  • Password Recovery on Cisco IOS

  • Cisco IOS File System

  • Upgrade Cisco IOS Image

Unit 7: Automation and Programmability

  • Device Programmability

  • REST API

  • Data Models and Structures

  • Configuration Management Tools and Version Control Systems

  • Introduction to Software Defined Networking (SDN)

  • Spine and Leaf Architecture

Unit 8: Cloud Computing

  • Virtual Machines and Containers

  • Introduction to Cloud Computing

  • Cloud Connectivity

20-740 Installation, Storage and Compute with Windows Server 2016

  • Introducing Windows Server 2016

  • Preparing and installing Nano Server and Server Core

  • Preparing for upgrades and migrations

  • Migrating server roles and workloads

  • Windows Server activation models

  • Lab : Installing and configuring Nano Server

  • Implementing Nano Server

  • Completing post-installation tasks on the Nano Server

  • Performing remote management

  • Module 2: Configuring local storage

  • Managing disks in Windows Server 2016

  • Managing volumes in Windows Server 2016

  • Lab : Managing disks and volumes in Windows Server 2016

  • Creating and Managing virtual hard disks by using Windows PowerShell

  • Converting virtual hard disks from .vhd to .vhdx

  • Resizing a volume

  • Module 3: Implementing enterprise storage solutions

  • Overview of direct-attached storage, network-attached storage, and storage area networks

  • Comparing Fibre Channel, iSCSI, and FCoE

  • Understanding iSNS, data centre bridging, and MPIO

  • Configuring sharing in Windows Server 2016

  • Lab : Planning and configuring storage technologies and components

  • Planning storage requirements

  • Configuring iSCSI storage

  • Configuring and managing the share infrastructure

  • Module 4: Implementing Storage Spaces and Data Deduplication

  • Implementing Storage Spaces

  • Managing Storage Spaces

  • Implementing Data Deduplication

  • Lab : Implementing Storage Spaces

  • Creating a storage space

  • Enabling and configuring storage tiering

  • Lab : Implementing Data Deduplication

  • Installing Data Deduplication

  • Configuring Data Deduplication

  • Module 5: Installing and configuring Hyper-V and virtual machines

  • Overview of Hyper-V

  • Installing Hyper-V

  • Configuring storage on Hyper-V host servers

  • Configuring networking on Hyper-V host servers

  • Configuring Hyper-V virtual machines

  • Managing Hyper-V virtual machines

  • Lab : Installing and configuring Hyper-V

  • Installing the Hyper-V server role

  • Configuring Hyper-V settings

  • Creating and configuring a virtual machine

  • Managing a virtual machine by using PowerShell Direct

  • Module 6: Deploying and managing Windows Server and Hyper-V containers

  • Overview of containers in Windows Server 2016

  • Deploying Windows Server and Hyper-V containers

  • Installing, configuring, and managing containers

  • Lab : Installing and configuring containers

  • Installing and configuring Windows Server containers by using Windows PowerShell

  • Installing and configuring Windows Server containers by using Docker

  • Module 7: Overview of high availability and disaster recovery

  • Defining levels of availability

  • Planning high availability and disaster recovery solutions with Hyper-V virtual machines

  • Backing up and restoring the Windows Server 2016 operating system and data by using Windows Server B

  • High availability with failover clustering in Windows Server 2016

  • Lab : Planning and implementing a high availability and disaster recovery solution

  • Determining the appropriate high availability and disaster recovery solution

  • Implementing storage migration

  • Implementing Hyper-V Replica

  • Module 8: Implementing and managing failover clustering

  • Planning a failover cluster

  • Creating and configuring a new failover cluster

  • Maintaining a failover cluster

  • Troubleshooting a failover cluster

  • Implementing site high availability with stretch clustering

  • Lab : Implementing a failover cluster

  • Creating a failover cluster

  • Verifying quorum settings and adding a node

  • Lab : Managing a failover cluster

  • Evicting a node and verifying quorum settings

  • Changing the quorum from Disk Witness to File Share Witness, and defining node voting

  • Adding and removing disks from the cluster

  • Module 9: Implementing failover clustering for Hyper-V virtual machines

  • Overview of integrating Hyper-V in Windows Server 2016 with failover clustering

  • Implementing and maintaining Hyper-V virtual machines on failover clusters

  • Key features for virtual machines in a clustered environment

  • Lab : Implementing failover clustering with Hyper-V

  • Configuring a failover cluster for Hyper-V

  • Configuring a highly available virtual machine

  • Module 10: Implementing Network Load Balancing

  • Overview of NLB clusters

  • Configuring an NLB cluster

  • Planning an NLB implementation

  • Lab : Implementing an NLB cluster

  • Implementing an NLB cluster

  • Configuring and managing the NLB cluster

  • Validating high availability for the NLB cluster

  • Module 11: Creating and managing deployment images

  • Introduction to deployment images

  • Creating and managing deployment images by using MDT

  • Virtual machine environments for different workloads

  • Lab : Using MDT to deploy Windows Server 2016

  • Installing and configuring MDT

  • Creating and deploying an image

  • Module 12: Managing, monitoring, and maintaining virtual machine installations

  • WSUS overview and deployment options

  • Update management process with WSUS

  • Overview of PowerShell DSC

  • Overview of Windows Server 2016 monitoring tools

  • Using Performance Monitor

  • Monitoring Event Logs

  • Lab : Implementing WSUS and deploying updates

  • Implementing WSUS

  • Configuring update settings

  • Approving and deploying an update by using WSUS

  • Lab : Monitoring and troubleshooting Windows Server 2016

  • Establishing a performance baseline

  • Identifying the source of a performance problem

  • Viewing and configuring centralized event logs

Networking in Windows Server 2016 (20-741)

  • Module 1: Planning and implementing an IPv4 network

  • Planning IPv4 addressing

  • Configuring an IPv4 host

  • Managing and troubleshooting IPv4 network connectivity

  • Lab : Planning an IPv4 network

  • Planning the IPv4 address assignments


  • Lab : Implementing and troubleshooting an IPv4 network

  • Verifying the IPv4 configuration

  • Troubleshooting IPv4

  • Module 2: Implementing DHCP

  • Overview of the DHCP server role

  • Deploying DHCP

  • Managing and troubleshooting DHCP

  • Lab : Implementing DHCP

  • Planning the DHCP server implementation

  • Implementing the DHCP configuration

  • Validating the DHCP implementation

  • Module 3: Implementing IPv6

  • Overview of IPv6 addressing

  • Configuring an IPv6 host

  • Implementing IPv6 and IPv4 coexistence

  • Transitioning from IPv4 to IPv6

  • Lab : Implementing IPv6

  • Reviewing the default IPv6 configuration

  • Implementing DHCPv6

  • Lab : Configuring and evaluating IPv6 transition technologies

  • Configuring network integration by using ISATAP

  • Configuring native IPv6 connectivity

  • Configuring 6to4 connectivity

  • Module 4: Implementing DNS

  • Implementing DNS servers

  • Configuring zones in DNS

  • Configuring name resolution between DNS zones

  • Configuring DNS integration with Active Directory Domain Services (AD DS)

  • Configuring advanced DNS settings

  • Lab : Planning and implementing name resolution by using DNS

  • Planning DNS name resolution

  • Implementing DNS servers and zones

  • Lab : Integrating DNS with Active Directory

  • Integrating DNS with Active Directory

  • Lab : Configuring advanced DNS settings

  • Configuring DNS policies

  • Validating the DNS implementation

  • Troubleshooting DNS

  • Module 5: Implementing and managing IPAM

  • IPAM overview

  • Deploying IPAM

  • Managing IP address spaces by using IPAM

  • Lab : Implementing IPAM

  • Installing the IPAM Server feature

  • Provisioning the IPAM Server feature

  • Managing IP address spaces by using IPAM

  • Module 6: Remote access in Windows Server 2016

  • Remote access overview

  • Implementing Web Application Proxy

  • Lab : Implementing Web Application Proxy

  • Implementing Web Application Proxy

  • Validating Web Application Proxy

  • Module 7: Implementing DirectAccess

  • Overview of DirectAccess

  • Implementing DirectAccess by using the Getting Started Wizard

  • Implementing and managing an advanced DirectAccess infrastructure

  • Lab : Implementing DirectAccess by using the Getting Started Wizard

  • Verifying readiness for a DirectAccess deployment

  • Configuring DirectAccess

  • Validating the DirectAccess deployment

  • Lab : Deploying an advanced DirectAccess solution

  • Preparing the environment for DirectAccess

  • Implementing the advanced DirectAccess infrastructure

  • Validating the DirectAccess deployment

  • Module 8: Implementing VPNs

  • Planning VPNs

  • Implementing VPNs

  • Lab : Implementing a VPN

  • Implementing a VPN

  • Validating VPN deployment

  • Lab : Troubleshooting VPN access

  • Troubleshooting VPN access

  • Module 9: Implementing networking for branch offices

  • Networking features and considerations for branch offices

  • Implementing Distributed File System (DFS) for branch offices

  • Implementing BranchCache for branch offices

  • Lab : Implementing DFS for branch offices

  • Implementing DFS

  • Validating the deployment

  • Lab : Implementing BranchCache

  • Implementing BranchCache

  • Validating the deployment

  • Module 10: Configuring advanced networking features

  • Overview of high performance networking features

  • Configuring advanced Hyper-V networking features

  • Lab : Configuring advanced Hyper-V networking features

  • Creating and using Microsoft Hyper-V virtual switches

  • Configuring and using the advanced features of a virtual switch

  • Module 11: Implementing software defined networking

  • Overview of software defined networking

  • Implementing network virtualization

  • Implementing Network Controller

  • Lab : Implementing Network Controller

  • Deploying Network Controller

  • Configuring network services with Network Controller

  • Managing and monitoring with Network Controller

Identity in Windows Server 2016

  • module 1: Installing and configuring DCs

  • Overview of AD DS

  • Overview of AD DS DCs

  • Deploying DCs

  • Lab : Deploying and administering AD DS

  • Deploying AD DS

  • Deploying a DC by performing DC cloning

  • Administering AD DS by using Active Directory Administrative Center

  • Module 2: Managing objects in AD DS

  • Managing user accounts

  • Managing groups in AD DS

  • Managing computer accounts

  • Using Windows PowerShell for AD DS administration

  • Implementing and managing organizational units

  • Lab : Deploying and administering AD DS

  • Creating and configuring user accounts in AD DS

  • Creating and configuring groups in AD DS

  • Managing computer objects in AD DS

  • Lab : Administering AD DS

  • Delegating administration for a branch office

  • Creating user accounts and groups by using Windows PowerShell

  • Module 3: Advanced AD DS infrastructure management

  • Overview of advanced AD DS deployments

  • Deploying a distributed AD DS environment

  • Configuring AD DS trusts

  • Lab : Domain and trust management in AD DS

  • Implementing child domains in AD DS

  • Implementing forest trusts

  • Module 4: Implementing and administering AD DS sites and replication

  • Overview of AD DS replication

  • Configuring AD DS sites

  • Configuring and monitoring AD DS replication

  • Lab : Managing and implementing AD DS sites and replication

  • Modifying the default site

  • Creating additional sites and subnets

  • Configuring AD DS replication

  • Monitoring and troubleshooting AD DS replication

  • Module 5: Implementing Group Policy

  • Introducing Group Policy

  • Implementing and administering GPOs

  • Group Policy scope and Group Policy processing

  • Troubleshooting the application of GPOs

  • Lab : Implementing a Group Policy infrastructure

  • Creating and configuring GPOs

  • Managing GPO scope

  • Lab : Troubleshooting a Group Policy infrastructure

  • Verify GPO application

  • Troubleshooting GPOs

  • Module 6: Managing user settings with GPOs

  • Implementing administrative templates

  • Configuring Folder Redirection and scripts

  • Configuring Group Policy preferences

  • Lab : Managing user settings with GPOs

  • Using administrative templates to manage user settings

  • Implement settings by using Group Policy preferences

  • Configuring Folder Redirection

  • Planning Group Policy (optional)

  • Module 7: Securing AD DS

  • Securing domain controllers

  • Implementing account security

  • Audit authentication

  • Configuring managed service accounts (MSAs)

  • Lab : Securing AD DS

  • Implementing security policies for accounts and passwords

  • Implementing administrative security policies

  • Deploying and configuring a read-only domain controller (RODC)

  • Creating and associating a gMSA

  • Module 8: Deploying and managing AD CS

  • Deploying CAs

  • Administering CAs

  • Troubleshooting and maintaining CAs

  • Lab : Deploying and configuring a two-tier CA hierarchy

  • Deploying an offline root CA

  • Deploying an enterprise subordinate CA

  • Module 9: Deploying and managing certificates

  • Deploying and managing certificate templates

  • Managing certificate deployment, revocation, and recovery

  • Using certificates in a business environment

  • Implementing and managing smart cards

  • Lab : Deploying certificates

  • Configuring certificate templates

  • Enrolling and using certificates

  • Configuring and implementing key recovery

  • Module 10: Implementing and administering AD FS

  • Overview of AD FS

  • AD FS requirements and planning

  • Deploying and configuring AD FS

  • Overview of Web Application Proxy

  • Lab : Implementing AD FS

  • Configuring AD FS prerequisites

  • Installing and configuring AD FS

  • Configuring AD FS for a single organization

  • Configuring AD FS for federated business partners

  • Module 11: Implementing and administering AD RMS

  • Overview of AD RMS

  • Deploying and managing an AD RMS infrastructure

  • Configuring AD RMS content protection

  • Lab : Implementing an AD RMS infrastructure

  • Installing and configuring AD RMS

  • Configuring AD RMS templates

  • Using AD RMS on clients

  • Module 12: Implementing AD DS synchronization with Azure AD

  • Planning and preparing for directory synchronization

  • Implementing directory synchronization by using Azure AD Connect

  • Managing identities with directory synchronization

  • Lab : Configuring directory synchronization

  • Preparing for directory synchronization

  • Configuring directory synchronization

  • Managing Active Directory users and groups

  • Module 13: Monitoring, managing, and recovering AD DS

  • Monitoring AD DS

  • Managing the AD DS database

  • Recovering AD DS objects

  • Lab : Recovering objects in AD DS

  • Backing up and restoring AD DS

Get started with Enterprise Linux

  • Describe and define open source, Linux distributions, and Red Hat Enterprise Linux.

Access the command line

  • Log into a Linux system and run simple commands using the shell.

Manage files from the command line

  • Copy, move, create, delete, and organize files while working from the bash shell.

Get help in Linux

  • Resolve problems by using local help systems.

Create, view, and edit text files

  • Manage text files from command output or in a text editor.

Manage local users and groups

  • Create, manage, and delete local users and groups, as well as administer local password policies.

Control access to files

  • Set Linux file system permissions on files and interpret the security effects of different permission settings.

Monitor and manage Linux processes

  • Evaluate and control processes running on Linux system.

Control services and daemons

  • Control and monitor network services and system daemons using system.

Configure and secure SSH

  • Configure secure command line service on remote systems, using Open SSH.

Analyze and store logs

  • Locate and accurately interpret logs of system events for troubleshooting purposes.

Manage networking

  • Configure network interfaces and settings on Red Hat Enterprise Linux servers.

Archive and transfer files

  • Archive and copy files from one system to another.

Install and update software

  • Download, install, update, and manage software packages from Red Hat and yum package repositories.

Access Linux files systems

  • Access, inspect, and use existing file systems on storage attached to a Linux server.

Analyze servers and get support

  • Investigate and resolve issues in the web-based management interface, getting support from Red Hat to help solve problems.

Comprehensive review

  • Review the content covered in this course by completing hands-on exercises.

Improve command line productivity

  • Run commands more efficiently by using advanced features of the Bash shell, shell scripts, and various utilities provided by Red Hat Enterprise Linux.

Schedule future tasks

  • Schedule commands to run in the future, either one time or on a repeating schedule.

Tune system performance

  • Improve system performance by setting tuning parameters and adjusting scheduling priority of processes.

Control access to files with ACLs

  • Interpret and set access control lists (ACLs) on files to handle situations requiring complex user and group access permissions.

Manage SE Linux security

  • Protect and manage the security of a server by using SE Linux.

Manage basic storage

  • Create and manage storage devices, partitions, file systems, and swap spaces from the command line.

Manage logical volumes

  • Create and manage logical volumes containing file systems and swap spaces from the command line.

Implement advanced storage features

  • Manage storage using the Stratis local storage management system and use VDO volumes to optimize storage space in use.

Access network-attached storage

  • Use the NFS protocol to administer network-attached storage.

Control the boot process

  • Manage the boot process to control services offered and to troubleshoot and repair problems.

Manage network security

  • Control network connections to services using the system firewall and SELinux rules.

Install Red Hat Enterprise Linux

  • Install Red Hat Enterprise Linux on servers and virtual machines.

Run Containers

  • Obtain, run, and manage simple, lightweight services as containers on a single Red Hat Enterprise Linux server.

Ahmed Abdul Hameed(Course CCNA 200 - 301)

CCNA,CCNA SEC.,CCNP, ITIL, MCSA,MCSE , CCAI, ECCS, CEH ,CHFI Senior Network and Telecom. Engineer – Cisco-Microsoft CompTIA -EC- Council Certified Academy instructor with 12 years of Experience of technical and managerial skills in one of the largest telecommunication companies in middle East Telecom Egypt ,also Certified instructor in the field of networks, security and management and Co founder & CEO of IT Gate Academy & IT Gate Corp.

Ezat Hussien(Course MCSA)

overall experience of (18) years in the different companies in IT field , and recently working as Computer Instructor. I have international certifications (MCP, MCSA , MCSE , MCITP , CCNA , CCNP , A+ , N+, CIW410,CIW470 and ICDL) and many certificates.
Networking Essentials .
LAN & WAN implementation .
Installing and Configuring Windows Server 2016 , 2012 , 2008 , 2003 and 2000 .
Installing and Configuring Active Directory.
Group Policies Management .
Installing and Configuring DHCP, DNS, VPN, IIS, NAP, IPSec, WSUS and WDS Servers .
Implementing and managing IPv4 , IPv6 .
Administration mail server via MS Exchange 2013 .
Implementing and managing Print Server .
Implementing and managing Storage Services .
Implementing and managing Backup Server .
Implementing and managing File Server .
Implementing and managing Failover Clustering .
Microsoft Network Managmenting .
Infrastructure planning & design.
Security Policies planning & Implementation .
Virtualization Hyper-V and VMWare
Network Security and Firewall.
Operating System Security.
Microsoft TMG Server.
Microsoft ISA Server.
Microsoft Network Infrastructure .
Hard ware Trouble Shooting Servers & Pcs.
In-depth knowledge of all Cisco enterprise routing and switching platforms.
Routing: Advanced knowledge on implementation & Tshoot of Routing Protocols (OSPF, EIGRP, RIP, RIPv2, Bgp, DEFAULT and STATIC routes, Redistribution, Route Filtering,,,,,,,,,)
Switching: Configuring and Troubleshooting of Data VLANs, Voice VLANs, Inter-VLAN routing, PAGP, LACP, Trunk, Ether-channel management features, advanced configuration.
Security Installation and configuration cisco ASA with cisco configuration professional, AAA access security with Acs server , securing the Management plane ,securing the local area network and Implementing IOS-Based IPS, IOS Firewall, Zone Based Firewall And Implementing VPN Technologies. Security Auditing Attack and Threat Analysis.
TCP
IP Over Linux System.
Trouble Shooting.
End users training.

Ahmed Aziz(Course LINUX Administration I)

Linux Admin I -II -ECSS -CND -CEH

Ahmed Aziz(Course LINUX Administration II)

Linux Admin I -II -ECSS -CND -CEH

Comments

6500EGP

Diploma Instructors

  • img

    Ahmed Abdul Hameed

    5.0

    (Course CCNA 200 - 301)

  • img

    Ezat Hussien

    4.0

    (Course MCSA)

  • img

    Ahmed Aziz

    5.0

    (Course LINUX Administration I)

  • img

    Ahmed Aziz

    5.0

    (Course LINUX Administration II)